SVTS Thuraya GmPRS
Smart Vehicle Tracking System
» Tracking With no Network Coverage Problems
and Expensive Roaming Costs
» Non Stop Tracking with Thuraya GmPRS
» Manage, Monitor and Control your Fleet
» Modular and Adaptable
» Easy to Install and Use
» Affordable Operating Costs
» Configurable and User Friendly Software.
» Optional Alarm Button Support.
» Periodic Position Reporting
» Smart Event Based Reporting
» Black Box Property
» Data Security
» Full-Duplex Voice Communication
» Optional Sensors and Accessories
SVTS Thuraya GmPRS Standard Package:
» SVTS Thuraya GmPRS Vehicle Unit.
» Triple Magnetic Antenna. (Satellite, GSM, & GPS)
» Power Cable.
SVTS Thuraya GmPRS Main Properties;
Tracking with no network coverage problems and expensive roaming costs:
You do not have to pay roaming costs for tracking your vehicles in the Thuraya satellites network coverage areas. You will not suffer any more from GSM network insufficient coverage.
Smart Vehicle Tracking System with SVTS Thuraya GmPRS enables you to know:
» Vehicles exact locations.
» Vehicles starting and finishing work hours.
» Total distance travelled by the vehicles on a
daily, weekly or monthly basis.
» Where and for how long the vehicles stopped?
Smart Event Based Reporting:
Events trigger automatic position reporting such as.
» Passing from a control point.
» Entering/Exiting a specified region.
» Exiting from a predetermined route.
» Exceeding a predefined speed limit.
» Pressing the alarm button.
Periodic Position Reporting:
Sending vehicle position in pre-defined periods
» Remotely by using the SVTS software.
» Based on time or distance traveled.
Polling:
User gets the latest speed and position data of the vehicles remotely by using the SVTS software via GPRS, SMS or data link.
Black Box Reporting:
Record data locally and allow it to be read remotely (store and forward feature).
Data Security:
Messages between the control center and the vehicle are encrypted to ensure secure communication. The CRC-CCIT algorithm is used to ensure data integrity and 128 bit encoding is used to ensure data security.
Voice Communication:
The unit supports and is fully equipped for voice features as well with optional handset.
Add-on features:
Modular structure allows the addition of telematics, sensors and control equipment for various purposes from driver identification and fuel consumption to load monitoring and immobilization and others.
Optional Alarm Button is available.
Technical Specifications:
General |
|
|---|---|
Operating Voltage |
9V-28V DC |
Sleeping Mode Current |
20 mA/12V |
Stand-by Current |
140 mA/12V |
Operating Current (during transmission) |
250 mA/12V |
| Power Consumption |
3W |
Antenna Connectors |
50 ohm SMA female |
Temperature Range |
Operating: -20°C to +55°C |
| Storage: -40°C to +85°C | |
Physical Properties |
Dimensions: 185 x 105 x 38 (mm) |
| Weight: approx. 270 Gram | |
Thuraya Module SM2500 |
|
|---|---|
Frequency Bandwidth |
1525-1559 MHz Downlink, 1626.5-1660.5 MHz Uplink GMPCS Bands. |
| Output Power |
2W |
Transmission |
Circuit switched voice, data/fax(max 9.6 kbps) |
GmPRS Transfer Speeds |
Uplink: max 15 kbps |
| Downlink: max 60 kbps | |
SIM Card |
Small size SIM, 3V |
Integrated GPS Receiver |
|
|---|---|
Channel Number |
20 (Sirf StarIII) |
Frequency |
L1, 1575,42 MHz |
Position Accuracy |
<10m 2D RMS <5m , DGPS (EGNOS) |
Max. Speed |
515 m/sec. |
Max. Acceleration |
4g |
Max. Altitude |
18000m |
| GPS Data Acquisition Times |
Cold Start: 45 sec Warm Start: 38 sec Hot Start: 8 sec Reacquisition: 0.1 sec |
Indicator LEDs |
|||
|---|---|---|---|
| Name | Color | Condition | Descreption |
| STATUS LED | Green | Blinking | Operating porperly |
| Halt > 2 minutes | Malfunction | ||
| GPS LED | Yellow | ON |
Connected to GPS network |
| OFF | Not connected to GPS | ||
| SAT LED | Red | ON | Connected to Thuraya network |
| Blinking | Connected to GmPRS (roaming) | ||
| OFF | No network connection | ||
| I/O Ports | ||
| Number | Name | Description |
| 1 | DI1 | Digital Input 1 (5-30V DC) |
| 2 | DI2 | Digital Input 2 (5-30V DC) |
| 3 | DI3 | Digital Input 3 (5-30V DC) |
| 4 | DI4 | Digital Input 4 (5-30V DC) |
| 5 | AI1 | Analog Input 1 (0-3.3V) |
| 6 | AI2 | Analog Input 2 (0-3.3V) |
| 7 | D01 | Digital Output 1 (3.3V-20mA) |
| 8 | D02 | Digital Output 2 (3.3V-20mA) |
| 9 | SW1_IN | External High Side Switch 1-IN (5-30V DC) |
| 10 | SW1_OUT | External High Side Switch 1 – OUT (switched output) (2A) |
| 11 | SW2_IN | External High Side Switch 2-IN (5-30V DC) |
| 12 | SW2_OUT | External High Side Switch 1 – OUT (switched output) (2A) |
| 13 | One-Wire Pin | This pin is used for connection of One-Wire sensors. |
| 14 | GND | Ground |
| 15 | +5V | Supply Voltage |
| 16 | GND | Ground |
| 17 | +3.3V | Supply Voltage |
| 18 | GND | Ground |
| 19 | +12V | Supply Voltage |
| 20 | GND | Ground |
| 21-26 | N/A | Not Assigned / Used |
